Tropic of Charlie

“The world of images controls the world of matter.”

- Christopher Alexander

Images

Blog


Work

About

News

g


Copyright © 2026 Charlie Allen 
all rights reserved.




What to Bring to a Jobsite... (and what not to) for Architects


UAB Biomedical Research and Psychology Building Spring of 2025


Introduction    



After spending a significant chunk of the last few years working as an architect working on construction administration, I thought I’d compile a list of items one should have with them on the job site... as well as noting what you may want to leave behind. First off, this list isn’t applicable to every jobsite; it can’t be comprehensive, but it’s worth skimming this list to make sure there isn’t something obvious that you’ll need that the contractor will or will not have with them. Hopefully this will help you avoid the rookie mistakes where you leave key items that then waste your time and energy, or even worse, the time and energy of the contractor (The contractor who is building your design) or the owner (who is paying you to design and protect your design), in front of whom it’d be nice to project a general aura of competence. 

*It’s worth noting that this compilation includes some things people don’t necessarily think to tell or ask of you, but you certainly in hindsight wish you had learned and applied sooner.*

Anything explicitly listed in emails/invitations leading up to the visit



If you receive any verbal or written invitation to the visit, listen for things the person mentions you should have, and read emails for any particular calendar invitation for a site. Here, often basic necessities of the jobsite are mentioned, but at the very least you should bring with you the things explicitly stated by the person(s) (often the contractor, the owner, or a fellow architect) who invited you explicitly thought to mention. Not having these things doesn’t just peg you as a nubie, it can peg you as someone who is incompetent or dismissive of whoever took the time to list items that would be helpful. Leaving these things behind would not be a good way to start a scenario where expensive architecture, engineering, or construction issues are being discussed. 

The Essentials: Hard hat, Safety Glasses, Vest, Close-Toed (possibly steel-toed) footwear, and any additional standard PPE on-site



You should have a hard hat, vest, safety glasses, and closed-toed shoes handy. It’s quite possible the closed-toed shoes may also need to be steel-toed shoes. Technically, the contractor is responsible for safety on the jobsite, but your list should contain these basic items that don’t vary much from jobsite to jobsite; generally, anything else will be communicated in the invitation mentioned above. This list also assumes that you are not wearing shorts or loose and flowing garb. That could leave you exposed to sharp things falling a short distance to the ground, or machines, that could quickly create a The Incredibles “No capes!” type moment or accident. 

Do not wear clothes to which you are particularly attached



Jobsites are places where buildings are actively being constructed, meaning there are lots of opportunities to accidentally get paint on your clothes, tear a pant leg, catch a string on something, wear the cheapest, appropriately formal clothing you can, and don’t wear anything of emotional or sentimental value that could fall off or get damaged. Shoes will likely get muddy. A good rule is to always meet or exceed the clothing choices of your client, and where possible, incorporate a fashion choice of theirs into your own wardrobe, where appropriate (e.g., in the South, if your client is an SEC school, do not hesitate to wear their colors, AND equally if not more important, don’t accidentally wear the colors of their rivals (even if they are your own school’s colors)). These are things you would hope would be common sense, but often you have to dash out the door; you think you know all of the agenda for the day, and then things come up. Do your best to be prepared.

Always be aware of the weather



Jobsites are generally not climate controlled, and they rarely cater to climatic comfort. Dress for the weather and dress to be comfortable in that weather for a far longer time than explicitly mentioned in any invitation beforehand. Site visits can be much shorter or much longer than initially anticipated, and so it’s important that you be in a state of comfort where spending more time or asking good questions can save time and money in the long run. This could mean wearing thinner (but not looser), breathable clothes in the Summer, and bringing a heavy, wind and weather-proof coat to a cold, wet jobsite. Rain may or may not reschedule a site visit, and where you might have electronics on you, packing an emergency poncho, or having a waterproof backpack are all excellent things to consider packing and tooling.

Bring hydration, but also remember bathroom facilities onsite are generally not a fun/clean prospect. 

Always bring the following Architect-pertinent items



Physical Tape and Laser Measure - These are the things that you'll be kicking yourself for not having on site all the time. Bring basic measuring tools: laser measure, extra batteries, tape measure, Laser measures, right? There are certain things that you just can't get a tape up to super easily so you want a good laser measure. Also get a tape measure, something that's almost cubic; the more heavy-duty, the better. 

*Note: you will not have any battery power that you do not personally pack, and you will not have Wi-Fi that you do not personally hotspot. This is particularly important if working on a tablet that won’t have cellular coverage.*

Flashlight & Laser Pointer - Bring basic visibility tools, including a flashlight and a laser pointer attached to it. You’ll find the flashlight on your phone is too diffuse to provide meaningful illumination any further than six feet (buildings have dark spaces much deeper than six feet). Your phone battery is also very susceptible to flashlight use, and battery power is quite valuable when you're on a job site because you're not running around charging anytime soon. 

Camera - A camera is of the utmost importance. This can be the camera on your phone, but if you are working on a project with high security or hacking concerns, be sure to ask and bring a non-network camera if you wish to take photos on the jobsite. But photos are rarely an issue and, in fact, are usually encouraged. I take approximately photos at a rate of about a hundred photos an hour on the jobsite. 

The Drawings - A means of accessing the drawings. The contractor should have a paper copy with all changes up to the latest ASI (Architects Supplemental Information), but you should have your firm’s latest drawing set handy, along with any exhibits, diagrams, details, on which you’ve been working. 

Drawing Medium - You should have a means of drawing, whether on a notepad or a tablet, when discussing details or anything with the contractor. You want to have good information you can use to inform any response you may supply them. Pick a method of taking notes and stick with it throughout the whole project; switching media can cause confusion and may lead you to misplace or forget entirely conversations that happened, which may end up being years prior.

Be observant and evolve



Jobsites are constantly evolving. Look at what everyone else is doing, and evaluate what is working for them and what isn’t. And don’t be afraid to try things where it makes sense. And when in doubt, ask!